Silver Epoxy, Electrically Conductive Adhesive, Heat Resistant, AA-DUCT 904 , 2.5gm Syringe

#ad
Atom Adhesives #ad - Operating temperature Up to 325 °C, Cure Type Heat cure. Aa-duct 904 offers excellent mechanical, electrical, and physical properties at continuous operating temperatures up to 175°C. Volume resistivity ohm cm equal 0001. This high performance conductive epoxy cures quickly at elevated temperatures making it ideally suited for rapid processing and assembly.

. Call 888 522-6742 for more information. Availability: This epoxy can be supplied in various different packages. General properties: appearance silver cure type heat cure or Room temperature Benefits High strength Excellent mechanical, electrical properties Substrates Excellent choice aluminum, copper, nickel, ceramic, glass, magnesium, bronze, steel, phenolic and G-10 epoxy glass boards.

Viscosity 200, 000 cp, shelf life 4 months At 25 °C 6 months refrigerated. Aa-duct 904 has also been used in microwave applications for EMI and FRI shielding, for assembly and repair of circuit boards and electronic component manufacturing. It is available in both a lower and higher viscosity grade for use in a variety of dispensing equipment and application techniques.

Silver Epoxy, Electrically Conductive Adhesive, Heat Resistant, AA-DUCT 904 , 2.5gm Syringe #ad - Operating temperature up to 325 °c typical applications electrical, printed circuit board and electronics repair uncured properties: viscosity at 25 °c cps 200000 shelf life 4 months at 25 °C 6 months refrigerated CURE SCHEDULE: 30 minutes At 175 °C 1 hour At 150 °C 2 hours At 125 °C MISC PROPERTIES: Hardness, conductive, circuitry, rmi/efi shielding, Shore D 83 Volume Resistivity ohm cm Greater than 0.

001 general information: for safe handling information on this product, consult the Material Safety Data Sheet, MSDS. Mechanical properties Hardness, Shore D 83, Appearance Silver.

#ad



Sciplus 400 Electrically Conductive Soldering Gun Wire in a Jar

#ad
American Science & Surplus #ad - Soldering gun in a jar wire glue-the solution when you can't find the soldering iron, can't reach the connection with both hands, don't want to bother, don't quite trust a fifth-grader with a hot gun, are out in the woods, whatever. This stuff conducts low voltage AC and DC circuits in a permanent bond and is easy to use.

Our each is a 03 oz/9ml jar. Soldering gun in a jar wire glue-the solution when you can't find the soldering iron, are out in the woods, don't want to bother, can't reach the connection with both hands, don't quite trust a fifth-grader with a hot gun, whatever. This stuff conducts low voltage AC and DC circuits in a permanent bond and is easy to use.

Sciplus 400 Electrically Conductive Soldering Gun Wire in a Jar #ad - Our high-tech support group suggests that a toothpick is a good way to apply it. Cures overnight. Cures overnight. Our high-tech support group suggests that a toothpick is a good way to apply it. Our each is a 03 oz/9ml jar.

#ad



Low Cost, Low Volume Resist., Electrically Conductive Silver Epoxy Adhesive, AA-DUCT 906 , 2.5gm kit

#ad
Atom Adhesives #ad - Mix ratio, 100:5 Resin/Hardener. Availability: This epoxy can be supplied in various different packages. This unique formulation is based on a silver coated ceramic that results in lower material costs without adversely sacrificing the properties obtained with a pure silver formulation. Uncured properties: viscosity at 25 °c cps paste silver coated ceramic, % 50-75 pot life at 25 °c 30 minutes cure schedule: 15 minutes At 100 °C 30 minutes At 60 °C 24 hours At 25 °C MISC PROPERTIES: Volume Resistivity Less than 0

0015 hardness, shore d 81 compressive strength, 600 general informATION: For safe handling information on this product, psi 13, consult the MSDS. Aa-duct 906 represents the newest technology since the introduction of electrically conductive silver compounds. This concept opens the door to a wide range of applications previously prohibited by the much higher cost of conventional silver conductive.

Low Cost, Low Volume Resist., Electrically Conductive Silver Epoxy Adhesive, AA-DUCT 906 , 2.5gm kit #ad - This stuff conducts low voltage AC and DC circuits in a permanent bond and is easy to use. Cures overnight. Appearance silver, Cure Type Heat cure or Room temperature. Soldering gun in a jar wire glue-the solution when you can't find the soldering iron, are out in the woods, don't want to bother, can't reach the connection with both hands, don't quite trust a fifth-grader with a hot gun, whatever.

Mechanical properties hardness, psi 13, Compressive Strength, Shore D 81, 600. Volume resistivity less than 0

#ad