As an Amazon Associate I earn from qualifying purchases.
Case Club #ad - Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Case is 100% shippable and airline approved for TSA checked luggage. Customizable lid hold down blocks that can be adjusted for each gun.
100% waterproof IP67 & Dustproof. Case has a lifetime warranty. Max overall gun height is 11. 13". Case has wheels. Case will weight about 75 lbs loaded with guns. Case fits x4 rifles or shotguns under 41" in overall length, x12 Rifle Magazines, x24+ Pistol Magazines, x3 Semi-Auto Pistols, and x1 Moisture Absorbing Silica Gel Canister Included.
Two padlock points that support a customer supplied padlock with a 1/4" shackle. Case will likely not fit large side attachments, Side by Side Barrels, Bipods, or Large bolts that stick out the side.
Case Club #ad - Do not settle for cheap and flimsy diced foam! diced foam tears easily, collects dirt, which does NOT absorb liquids, can be cleaned easily, does NOT tear easily, lasts a lifetime, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, retains water rust!, and will NOT disintigrate.
3
Case Club #ad - Does not accommodate side attachments. Does not fit 26" barrel Ruger Precision Rifle models. Waterproof case comes with precut foam to hold precision rifle and ar-15 or ar-10 rifle, along with a Semi-Auto Pistol.
Case is airline approved for checked luggage, wheeled, padlockable, fully shippable & dustproof. All rpr owners should see our "RPR w/ Folding Stock Case" instead for a better fitment.
Case Club #ad - Built in accessory pocket will hold loose gear such as safety equipment, tools, and ammunition. Your climate & rifle usage will dictate how often a recharge is required. Also included is a reusable moisture removing silica gel canister to prevent gun rust.
Case comes with a small waterproof accessory box that has a designated cutout to store small items. Heavy duty waterproof case with pre-cut foam holds ar-15 rifle with collapsible stock max overall rifle length of 34.
Use the included razor blade to connect the perforations so you can accommodate your unique rifle setup. O-ring gasket in the lid keeps water & dust out. Built-in lid stay so the lid will stay upright when open. Legal for rifle storage in all 50 states. Pistol cutout also includes perforations for a flashlight or laser. Edge wheels allow the case to roll over smooth & rough terrain.
Case Club #ad - Inside case dimensions are 41. 93"l x 13. 56"w x 5. 12"d and are outside dimensions are 44. 25"l x 16. 00"w x 6. 25"d. Case is airline approved for checked luggage, dustproof, shippable, padlockable, and airtight.
Case comes with a cutting blade to make customizing the foam a breeze. Do not settle for cheap and flimsy diced foam! diced foam tears easily, does not tear easily, collects dirt, retains water rust!, can be cleaned easily, which does NOT absorb liquids, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, lasts a lifetime, and will NOT disintegrate.
Case Club #ad - Please refer to diagram image to make sure your rifle will fit. Fits Palm Shelf. Fits bolt in or out of the gun. Foam insert is closed cell military grade polyethylene which can be wiped clean. Fits under barrel attachments.
Orange peel texture added to exterior finish to minimize scratches. Case is airline approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Waterproof wheeled case comes with pre-cut foam to hold your Ruger Precision with folding stock along with one pistol, 3-5 extra rifle magazines, included silica gel canister, included waterproof box, 4 extra pistol magazines, bolt if desired & various accessories.
Fits bipod. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves. Fits scope within a 3. 70" height. Case is ata approved and can be shipped. Stainless steel added to padlock points for added security.
Case Club #ad - Foam insert is closed cell high grade polyethylene which can be wiped clean. Accommodates all major scopes & optics within a 3. 62" height, bipods, and foregrips.
Case Club #ad - Fits under barrel attachments. Orange peel texture added to exterior finish to minimize scratches. 26" barrel RPRs will not fit. Fits scope within a 3. 70" height. Stainless steel added to padlock points for added security.
Long front handle length to help counter balance off center weighted loads. Waterproof wheeled case comes with pre-cut foam to hold almost any precision rifle up to 49. 3" long. See image diagram for fitment guidance.
Structural ribs added to outside of case for increased durability. Fits bolt in or out of the gun. Foam insert is closed cell military grade polyethylene which can be wiped clean. Also holds pistol, magazines, included waterproof box, bolt if desired & various accessories. Case is ata approved and can be shipped. Please refer to diagram image to make sure your rifle will fit.
Case Club #ad - Does not accommodate side attachments. Case is airline approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Waterproof case comes with precut foam to hold 2 AR-15 or AR-10 Rifles, along with a Semi-Auto Pistol.
Case Club #ad - Moisture removing silica gel canister & waterproof accessory box are included. Also holds extra magazines, a pistol, rifle attachments, optics, & various accessories.
Case is airline approved for checked luggage, padlockable, fully shippable & dustproof. All of these rifles must still fall within constraints of above "Max Dimension" diagram Max length of rifle is 33.
1. Case Club
#adCase Club 4 Rifle or Shotgun Waterproof Shipping Case fits Multiple Guns & 3 Pistols Along with Included Silica Gel Canister to Prevent Gun Rust
#ad100% waterproof IP67 & Dustproof. Case has a lifetime warranty. Max overall gun height is 11. 13". Case has wheels. Case will weight about 75 lbs loaded with guns. Case fits x4 rifles or shotguns under 41" in overall length, x12 Rifle Magazines, x24+ Pistol Magazines, x3 Semi-Auto Pistols, and x1 Moisture Absorbing Silica Gel Canister Included.
More information #ad
Accommodates optics including scopes & lasers, foregrips including vertical foregrips and angled foregrips, and Grip fins & red-dots, Pistol optics & under barrel attachments, under barrel attachments including flashlights & featureless rifles. Two padlock points that support a customer supplied padlock with a 1/4" shackle. Case will likely not fit large side attachments, Side by Side Barrels, Bipods, or Large bolts that stick out the side.
| Brand | Case Club #ad |
| Model | 4 Rifle/Shotgun |
More information #ad
2. Case Club
#adCase Club 40 Inch Rifle Carrying Case with Closed Cell Military Grade Polyethylene Foam
#ad3
More information #ad
3 piece set of foam to allow full customization 1 convolute lid layer, a 2. 125" base cutout layer, and a 0625" bottom flat pad. Case comes with disposable razor blade that makes customization a breeze. Built in padlockable holes for extra security. Interior dimensions of the case measure 40"Lx 13. 5"w x 5. 0"h the case narrows to 11. 8"w in the center.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Height | 5 Inches |
| Length | 41.5 Inches |
| Weight | 7 Pounds |
| Width | 15 Inches |
| Part Number | CC6500CCFLPE |
More information #ad
3. Case Club
#adCase Club Precision and AR Rifle Pre-Cut Waterproof Case with Accessory Box and Silica Gel to Help Prevent Gun Rust Gen 2
#adCase is airline approved for checked luggage, wheeled, padlockable, fully shippable & dustproof. All rpr owners should see our "RPR w/ Folding Stock Case" instead for a better fitment.
More information #ad
Also holds extra magazines, gun attachments, optics, & various accessories. Foam insert is closed cell high grade polyethylene which can be wiped clean. 2 moisture removing silica gel canisters & waterproof accessory box & foam cutter are included. See image diagram for fitment guidance.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC108187PLPREAR |
More information #ad
4. Case Club
#adCase Club AR-15 Pre-Cut Waterproof Rifle Case with Included Silica Gel to Help Prevent Gun Rust & Small Waterproof Accessory Box Gen 2
#adCase comes with a small waterproof accessory box that has a designated cutout to store small items. Heavy duty waterproof case with pre-cut foam holds ar-15 rifle with collapsible stock max overall rifle length of 34.
More information #ad
8" along with a Semi-Auto Pistol. Case also fits x2 standard or pmag 30rd 5. 56/. 223 magazines & x1 pistol magazine +1 in the pistol magwell. Custom foam is closed cell & meets mil-spec packaging requirements. Use the included razor blade to connect the perforations so you can accommodate your unique rifle setup. O-ring gasket in the lid keeps water & dust out. Built-in lid stay so the lid will stay upright when open. Legal for rifle storage in all 50 states. Pistol cutout also includes perforations for a flashlight or laser. Edge wheels allow the case to roll over smooth & rough terrain.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC10836236PL |
More information #ad
5. Case Club
#adCase Club Hard Waterproof Rifle Case with Closed Cell Military Grade Polyethylene Foam 42.5 x 13.0 x 5.12 Inches
#adCase comes with a cutting blade to make customizing the foam a breeze. Do not settle for cheap and flimsy diced foam! diced foam tears easily, does not tear easily, collects dirt, retains water rust!, can be cleaned easily, which does NOT absorb liquids, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, lasts a lifetime, and will NOT disintegrate.
More information #ad
Built in locking latches with included keys for added security, and a built in pressure equalization purge valve for changing altitudes.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | CC1084275PLPE |
More information #ad
6. Case Club
#adCase Club Case Fits Ruger Precision Rifle. Pre-Cut, Waterproof, with Accessory Box and Silica Gel to Help Prevent Gun Rust
#adOrange peel texture added to exterior finish to minimize scratches. Case is airline approved for checked luggage, padlockable, wheeled, fully shippable & dustproof. Waterproof wheeled case comes with pre-cut foam to hold your Ruger Precision with folding stock along with one pistol, 3-5 extra rifle magazines, included silica gel canister, included waterproof box, 4 extra pistol magazines, bolt if desired & various accessories.
More information #ad
Fits bipod. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves. Fits scope within a 3. 70" height. Case is ata approved and can be shipped. Stainless steel added to padlock points for added security.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | CC6063HXYWRUGPREC |
More information #ad
7. Case Club
#adCase Club IWI Tavor Pre-Cut Waterproof Rifle Case with Accessory Box & Silica Gel to Help Prevent Gun Rust Gen 2
#adMore information #ad
Holds a single factory iwi x95, 7, SAR, or TAR-21 Rifle. Case is airline approved for checked luggage, padlockable, fully shippable & dustproof. Holds up 4 standard or pmag 30-rd magazines.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC10836236PLTAVOR |
More information #ad
8. Case Club
#adCase Club Precision Rifle Pre-Cut Waterproof Case with Accessory Box & Silica Gel to Help Prevent Gun Rust Gen 2
#adLong front handle length to help counter balance off center weighted loads. Waterproof wheeled case comes with pre-cut foam to hold almost any precision rifle up to 49. 3" long. See image diagram for fitment guidance.
More information #ad
If you have a ruger precision rifle with folding stock, included silica gel canister, please refer to our smaller Ruger Precision Rifle Case made specifically for that rifle. Fits bipod. Wide bodied snap latches that can be used with gloves. Structural ribs added to outside of case for increased durability. Fits bolt in or out of the gun. Foam insert is closed cell military grade polyethylene which can be wiped clean. Also holds pistol, magazines, included waterproof box, bolt if desired & various accessories. Case is ata approved and can be shipped. Please refer to diagram image to make sure your rifle will fit.
| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC108187PLPREC |
More information #ad
9. Case Club
#adCase Club 2 AR Pre-Cut Waterproof Rifle Case with Accessory Box & Silica Gel to Help Prevent Gun Rust Gen 2
#adMore information #ad
2 moisture removing silica gel canisters & waterproof accessory box & foam cutter are included. Also holds extra magazines, optics, gun attachments, & various accessories. Foam insert is closed cell high grade polyethylene which can be wiped clean.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC108187PL2AR |
More information #ad
10. Case Club
#adCase Club Pre-Cut Waterproof Bullpup Rifle Case with Accessory Box & Silica Gel to Help Prevent Rust Gen 2
#adCase is airline approved for checked luggage, padlockable, fully shippable & dustproof. All of these rifles must still fall within constraints of above "Max Dimension" diagram Max length of rifle is 33.
More information #ad
09". Case fits iwi tavor 7, p90, desert tech mdr, mdrx, steyr aug, kel tec rfb, fnH PS90, x95, desert tech srs-a1 covert, sar, kriss vector, tar-21, Berretta CX4 Storm. Foam insert is closed cell high grade polyethylene which can be wiped clean.| Brand | Case Club #ad |
| Manufacturer | Case Club #ad |
| Part Number | ASSYCC108361PLBULLPUP |
More information #ad
