1. Ronin Factory
#ad
Concealed Carry Holder, Magnetic Pistol & Gun Mount for Car & Home, 35 Lbs Holding Strength
#adRonin Factory #ad - Strong holding power! - rare-earth reverse-polarized magnets rated for 35 lbs of holding power! Holds virtually any firearm! - glock, Ruger, cz-usa, Smith & Wesson M&P, Sig Saur, Springfield and also hold extra magazines!.Product size: Size: 3. 8" wide x 1. 4" tall x. 38" thick. Rubber coated - prevents magnet from scratching your gun or magazine.
More information #ad
Simple installation - 4 mounting screws included and a slim 3/8"" thickness means you can mount it in the car, closet, home, office, bed, wherever you need!. Be ready & able in seconds - every second counts in a life-saving event, this gun magnet will hold your firearm allowing easy & quick access.Brand | Ronin Factory #ad |
Manufacturer | Ronin Factory #ad |
Part Number | 758381843418 |
More information #ad
2. Recover Tactical
#ad
No Need for a Gunsmith, Recover Tactical SHR9 Compatible with The Smith & Wesson Shield 9mm and SW40 Picatinny Rail, Easy Installation, No Modifications Required to Your Firearm
#adRecover Tactical #ad - Least expensive solution on the market and the only one that is 100% reversible without needing to modify your pistol. Goes on and off in under 3 minutes. Made out of Glass Reinforced Nylon. Won't damage your Firearm. Designed for the Smith & Wesson Shield.More information #ad
Brand | Recover Tactical #ad |
Manufacturer | Recover Tactical #ad |
More information #ad
3. Pearce Grips
#ad
Black, for Glock 43, Pearce Grips Extension
#adPearce Grips #ad - Forms the next logical finger position. Blends with the contours and texture of the handgun and have a factory appearance.More information #ad
Enhances control and comfort without sacrificing conceal ability. Additional length results in better control and comfort without altering the capacity of the factory magazine.Brand | Pearce Grips #ad |
Manufacturer | RSR Group, Inc #ad |
Height | 1.25 Inches |
Length | 4.25 Inches |
Weight | 0.03 Pounds |
Width | 3 Inches |
Part Number | PG-43 |
Model | PG-43 |
More information #ad
4. TALON Grips
#ad
Black Rubber, TALON Grips 100R Rear Wrap Rubber Grip for Glock 43, Left/Right
#adTALON Grips #ad - Custom designed and manufactured for this specific firearm for an OEM quality fit and finish. Easy to install within minutes. Only 05mm in thickness they create no perceptible increase in grip thickness.More information #ad
Talon grips are a us patented single piece wrap around adhesive grip. Create a functional and positive interface between the operator and the firearm. Available in rubber or granulate texture.Brand | TALON Grips #ad |
Manufacturer | Talon Grips #ad |
Height | 4 Inches |
Length | 6 Inches |
Weight | 1 ounces |
Width | 9 Inches |
Part Number | 100R |
Model | TALON100R |
More information #ad
5. MLLL
#ad
MLLL 2 Pieces Extender Fits Glock Model Mid & Full Size 17,19,22,23,24,25,26,27,28,31,32,33,34(Long Black)
#adMLLL #ad - Fits gen 3 and gen 4 and Gen 5 Factory Glock mag-azines. They are made from high impact Polymer and withstand drop tests at temperatures from -20 F to 350 F.More information #ad
These units blend with the contours and texture of the handgun giving a factory appearance. 2 pieces fits glock models 17, 22, 32, 27, 28, 31, 33, 25, 26, 19, 23, 24, 34.Brand | MLLL #ad |
Manufacturer | MLLL02 #ad |
More information #ad
6. Pearce Grips
#ad
Pearce Grips PG-MPS Grip Extension for S&W M&P Shield
#adPearce Grips #ad - Forms the next logical finger positioning feature to provide control and comfort without sacrificing conceal ability. Enhances control and comfort without sacrificing conceal ability.Fits s&w m&p shield both9mm and. 40 cal. Made from high impact polymer and withstands drop tests at temperatures from -20 F to 350 F.
More information #ad
It adds approximately 3/4" inch additional gripping surface. This unit replaces the magazine base plate on the m&p shield & shieLD 2. 0 9mm and 40 cal. Blends with the contours and texture of the handgun and have a factory appearance. This extension does not alter the capacity of the magazine.Brand | Pearce Grips #ad |
Manufacturer | RSR Group, Inc #ad |
Height | 1.25 Inches |
Length | 4.25 Inches |
Weight | 0.04 Pounds |
Width | 3 Inches |
Part Number | PG-MPS |
Model | PG-MPS |
More information #ad
7. DRYFIREMAG
#ad
DRYFIREMAG Training Magazine for Glock 9, 45 G.A.P Dry Fire Training with Audible & Tactile Simulation Safe for Use at Home and Uses No Ammo, 357, 40
#adDRYFIREMAG #ad - Audible & tactile simulation - provides simulation of firing pin release and trigger reset on any 9mm,. 40 caliber,. 357 caliber or. 45 g. A. P. No racking the slide - the dryfireMag resets the trigger without having to cycle or rack the slide so you can practice double taps and realistic multiple shots.Save on ammo - with the dryfiremag you don’t need to spend all your money on ammo, yet you still get to practice your shooting with a realistic experience.
More information #ad
Dry fire training - build proper trigger muscle memory using your own pistol for training and shooting practice. Glock* pistols that use a double stack magazine. Safe practice at home - because no ammo is used and no loud gunshots occur you can safely practice at home and save money on range fees.Brand | DRYFIREMAG #ad |
Manufacturer | DryFireMag, LLC #ad |
Height | 1.5 Inches |
Length | 5 Inches |
Weight | 0.2 Pounds |
Width | 1.5 Inches |
More information #ad
8. TRUGLO
#ad
Green, TRUGLO Brite-Site Tritium Sight for Glock 42
#adTRUGLO #ad - Sport type: Hunting. Fits glock 42. Concealed fiber can be seen by the shooter only. Cnc machined steel construction. Tritium glow in the dark green front/green rear 3 dot design.More information #ad
Brand | TRUGLO #ad |
Manufacturer | TruGlo #ad |
Height | 1 Inches |
Length | 9 Inches |
Weight | 0.06 Pounds |
Width | 7 Inches |
Part Number | TG231G1A |
Model | TG231G1A |
Warranty | Limited |
More information #ad
9. TACwolf
#ad
TACwolf 3pc Extension Fits Glock Model Mid & Full Size 17/18/19/22/23/24/25/31/32/34/35/37
#adTACwolf #ad - Made from high impact polymer and withstand drop tests at temperatures from -20 F to 350 F. 100% synthetic. Finish/Color: Black. Fit: glock model mid & full size 17/18/19/22/23/24/25/31/32/34/35/37.More information #ad
Provided comfort by increasing the length of the grip by 1/4 to 1 inch over stock dimensions. Provided an easier means of manually extracting the magazines.Brand | TACwolf #ad |
Manufacturer | TACwolf #ad |
More information #ad
10. Recover Tactical
#ad
No Modifications to Your Pistol Required, Recover Tactical Slide Rack Assist Compatible with The Glock, Get Extra Grip While Racking The Slide Glock 17/19/22/23/24/35
#adRecover Tactical #ad - Will not damage your firearm. Still holster compatible. Make sure you select the correct version when checking out. No need for a gunsmith, goes on in under 3 minutes. Value priced.More information #ad
Brand | Recover Tactical #ad |
Manufacturer | ReCover Tactical #ad |
Part Number | 2343780497 |
More information #ad