As an Amazon Associate I earn from qualifying purchases.
Alfa Pasca #ad - 1, flat bar: 620/640/660/680/700/720/740 mm; 640/660/680/700/720/740/760 mm, carbon mtb handlebar diameter: 31. 8mm; bar end diameter: 22. 2mm; appearance: 3k glossy / 3k matte / ud matte, riser rise: 18 mm, Upsweep riser: 3 °, flat backsweep: 5 °, Backsweep riser: 8 °, flat sweep up: 0 °. In general, cross-country riders prefer short handlebars, enduro riders and downhill riders like much wider handlebars.
Cracks can occur when strong tensions occur;. The carbon fiber MTB handlebar vibrates at more comfortable speeds than aluminum alloy bars. 3, follow the specified tightening torque 4 nm; it is recommended to use a hex wrench to tighten the screw.
Since it is made of carbon, install the carbon mtb handlebar correctly, it is recommended to tighten the body to support it by tightening with your hands. Just gradually tighten the handlebar, you can also apply carbon fiber mounting paste on the handlebar of your mtb to ensure a snug fit, tighten until the handlebar stops moving, the best torque of the carbon handlebar riser is 4Nm, the handlebar center of the mountain bike has a good non-slip coating. The poles are also a perfect size to fit related bike accessories. The carbon handlebar makes pedaling more comfortable.
RXL SL #ad - The bicycle hybrid handlebars also Dimensionally perfect for headset mount and all attachments. The 18mm rise made biking enjoyable on the wrists and back, go faster, and stay in control even on the roughest terrain. Nice finished: awesome carbon fiber pattern looks – long bars 31. 8 made very clean and look nice with 3K matt, Edges of are finished nicely, no exposed seams or sharp bits.
Mounting and alignment marks are easy to see. Kid handlebar take some of the vibration and hits better out of gravel and dirt paths, Downhill, gravel road bombing. With wide mountain bike handlebars you can ride further, FASTER, which decreases back discomfort and reduce shoulder stress.
You will feel like it is a little bit snappier in turning, without the transferring of that sharp jarring feel from metal that make your bike more comfortable. Vibration dampening: say goodbye to sore hands, drop offs and crashes. Just be careful and don't over tighten the clamps. Ride longer, and more comfortably: ergonomic & comfortable straight handlebars black-the mountain bike handlebar let you ride in a more upright position, less hand and wrist pain for long rides and better control on technical terrain. This mountain bike handlebars 31.
GRTE #ad - Easy to install:easy to install and use, it's a great accessory for cycling enthusiasts. Lightweight:its specific gravity is less than 1/4 of steel, but the strength is very strong and not easy to deform. It is suitable for long distance riding and downhill.
PLATT #ad - Lightweight: made of high strength carbon fiber. Great for Downhill and Off-Road. Size: 31. 8 * 680/700/720/740/760 mm. Excellent shockproof and maximum firmness.
Powerful compatibility : Compatible with most mountain bikes. Give you best support during cycling. Easy to assemble and disassemble:Convenient to fix it on your bike and save your time.
Alloy 7050 has a higher hardness and tensile strength over alloy 6061 & 7005. Order now, worry free! we're so confident about our product quality that we can provide 5 year warranty ! Made in Taiwan. Pro level: material: al7050 The higher hardness makes it to be machined more difficultly than 6061 & 7005.
RXL SL #ad - Install the product correctly, please follow the specified tightening torque 4Nm;we recommend using a hexagon wrench to tighten the screw. Tighten the screws. 5. 1. Ergonomical design: carbon drop bars is easy to assemble and offer the leverage and control front fork and wheel efficiently.
4. Cracks can occur when strong tensions occur. Riser backsweep: 8 degree, riser: 18mm;Flat backsweep:5 degree, Riser upsweep: 3 degree, Flat upsweep: 0 degree.
Satori #ad - Weight: 340g=075lbs 740mm. Specification: sweep: 7 angle degree. Rise: 20mm. Pro level: alloy 7050 has a higher hardness and tensile strength over alloy 6061 & 7005. Suitable for serious off-road riding, like downhill and enduro riding.
Width: 740mm. It reaches a good balance between weight and rigidity. Riser bar: flat handlebar has a low center of gravity and is inherently suitable for climbing. Compatibility: compatible with all stem with bar clamp size 31.
PINCASOL #ad - Weight– 266g for 80mm stem ; 285g for 90mm stem ; 290g for 100mm Stem. Features– xc world cup level integrated carbon bar & stem, Additional sanding on grip/lever area help to reduce clamping forces, One piece construction, Flat T-Bar shape .
Ritchey #ad - Angle: 9 degree. Height: 20 mm. Material: aluminium 6061 double butted. Width: 740 mm. Oversize diameter 31. 8mm. Comp range riser Handlebar Oversize Diameter.
Satori #ad - Strong & light: satori produces high quality carbon handlebars. Application: great for mountain bike riding, off road, trail riding, trekking bikes.
Absorb vibrations: carbon handlebar absorbs vibrations from trial riding. Ensures more comfortable riding. Material: Full Carbon. Prevents vibrations into riders' hands. Weight: around 205g = 045lbs.
1. Alfa Pasca
#adAlfa Pasca Mtb Riser Handlebars 31.8 Handlebars for Mountain Bike Riser Bar 740mm Black 3K Matte
#adCracks can occur when strong tensions occur;. The carbon fiber MTB handlebar vibrates at more comfortable speeds than aluminum alloy bars. 3, follow the specified tightening torque 4 nm; it is recommended to use a hex wrench to tighten the screw.
More information #ad
2, more beautiful, brighter, carbon fiber is comparable to aluminum alloy: lighter, has adequate elasticity, stronger in pressure resistance, carbon fiber mtb flat handlebar, anti shock, improving the class of the your bike in minutes. Since it is made of carbon, install the carbon mtb handlebar correctly, it is recommended to tighten the body to support it by tightening with your hands. Just gradually tighten the handlebar, you can also apply carbon fiber mounting paste on the handlebar of your mtb to ensure a snug fit, tighten until the handlebar stops moving, the best torque of the carbon handlebar riser is 4Nm, the handlebar center of the mountain bike has a good non-slip coating. The poles are also a perfect size to fit related bike accessories. The carbon handlebar makes pedaling more comfortable.
| Brand | Alfa Pasca #ad |
| Manufacturer | Alfa Pasca #ad |
| Weight | 0.33 Pounds |
| Part Number | APU-3-0068 |
| Model | mtb handlebar |
| Warranty | 1 year |
More information #ad
2. RXL SL
#adCarbon riser handlebars 74 mtb bars Mountain Bike Handle Bars For Downhill Fixie Enduro XC BMX Dirt, MTB Handlebars, 740mm Mountain Bike Handlebars
#adMounting and alignment marks are easy to see. Kid handlebar take some of the vibration and hits better out of gravel and dirt paths, Downhill, gravel road bombing. With wide mountain bike handlebars you can ride further, FASTER, which decreases back discomfort and reduce shoulder stress.
More information #ad
Full carbon fiber material: better than aluminum alloy bars - the 740mm high rise handlebars are made of full carbon fiber, non slip and pretty nice, 3K Matte, These 740mm handlebars 31.8 are extremely lightweight, stiff and much more comfortable with vibrations at speed than aluminum bars. You will feel like it is a little bit snappier in turning, without the transferring of that sharp jarring feel from metal that make your bike more comfortable. Vibration dampening: say goodbye to sore hands, drop offs and crashes. Just be careful and don't over tighten the clamps. Ride longer, and more comfortably: ergonomic & comfortable straight handlebars black-the mountain bike handlebar let you ride in a more upright position, less hand and wrist pain for long rides and better control on technical terrain. This mountain bike handlebars 31.
| Brand | RXL SL #ad |
| Manufacturer | RXL SL #ad |
| Height | 0.87 Inches |
| Length | 29.13 Inches |
| Weight | 0.37 Pounds |
| Width | 1.25 Inches |
| Part Number | Riser |
More information #ad
3. GRTE
#adGRTE Carbon Fiber Mountain Bike Handlebar Bent Bicycle Handlebar MTB Riser Bar Mountain Bike and Road Bikes Lightweight 31.8/25.4mm 400mm to 740mm,31.8mm,740mm
#adMore information #ad
Carbon fiber material: adopts T700 high strength carbon fiber material, wear and corrosion resistant. Wide range of application:universal handlebar, suitable for most kinds of folding bikes, mountain bikes, balance bikes and modified bikes. Professional design:Shockproof and durable.| Brand | GRTE #ad |
| Manufacturer | GRTE #ad |
| Part Number | 150-155-710 |
More information #ad
4. PLATT
#adCarbon Bike Handlebar 3K Glossy Bicycle Handlebar 31.8mm Flat/Riser Bars for Road MTB Bikes 680mm-760mm White Flat, 740MM
#adPowerful compatibility : Compatible with most mountain bikes. Give you best support during cycling. Easy to assemble and disassemble:Convenient to fix it on your bike and save your time.
More information #ad
Pro-design: ergonomic structure, CNC precision bending. Best choice for riders who need more control on their bicycles. Easy to clean and durable. Extra long handlebars, help you control your mountain bike easily in complex terrain for all mountain extreme riding. Stable without compromise of stiffness. Comfortable and non-slip.| Brand | PLATT #ad |
| Manufacturer | PLATT #ad |
| Height | 1.57 Inches |
| Length | 29.13 Inches |
| Weight | 0.33 Pounds |
| Width | 1.57 Inches |
| Part Number | AZA 651232 |
| Model | White Flat |
| Warranty | 60 |
More information #ad
5. Satori
#adSatori Deviant 1 MTB Mountain Bike Bicycle Aluminum AL7050 Straight Flat Handlebar, Choice Size 31.8mm x 740mm Handle Bar -for Downhill and Enduro Riding
#adSatori #ad - Suitable for serious off road riding, such as downhill and enduro riding. Specification: sweep: 7 angle degree, Clamp Size: 31. 8mm, rise: 10mm, width: 740mm.Alloy 7050 has a higher hardness and tensile strength over alloy 6061 & 7005. Order now, worry free! we're so confident about our product quality that we can provide 5 year warranty ! Made in Taiwan. Pro level: material: al7050 The higher hardness makes it to be machined more difficultly than 6061 & 7005.
More information #ad
7050 offers better stress corrosion cracking resistance and corrosion resistance. Also it is very strong, compared with other entry level handlebars. Light & strong: very light handlebar weight: 305g. Compatibility: compatible with all stem with bar clamp size 31. 8mm.| Brand | Satori #ad |
| Manufacturer | SATORI #ad |
| Height | 1.97 Inches |
| Length | 29.53 Inches |
| Weight | 0.68 Pounds |
| Width | 2.76 Inches |
| Part Number | HD-DNT-740 |
More information #ad
6. RXL SL
#adRiser Handlebars Mountain Bike Handle Bars Handlebar Risers Handle Bar Risers Riser Handlebars Carbon 31.8 MTB Bicycle 740mm MTB Bars
#ad4. Cracks can occur when strong tensions occur. Riser backsweep: 8 degree, riser: 18mm;Flat backsweep:5 degree, Riser upsweep: 3 degree, Flat upsweep: 0 degree.
More information #ad
Brighter in Color. Made of t700 carbon fiber, carbon fiber compares to aluminum alloy:Lighter in weight. Much more beautiful in appearance. Stronger in pressure resistance. Has proper elasticity, improving your bicycle's class in minutes. Since it is made of carbon, we recommend tightening the body to support it by tightening with your hands. 3. Handlebar diameter:31. 8mm;bar end diameter:22. 2mm;appearance:3K Matte.| Brand | RXL SL #ad |
| Manufacturer | RXL SL #ad |
| Part Number | RXLSLTX0026 |
| Model | mtb handlebar |
| Warranty | 1 year warranty |
More information #ad
7. Satori
#ad20mm Rise, 7 Degree Sweep, Satori 31.8mm 740mm Flat Riser Handlebar for MTB Mountain Bicycle Downhill & Enduro AL7050 Aluminum Alloy
#adWidth: 740mm. It reaches a good balance between weight and rigidity. Riser bar: flat handlebar has a low center of gravity and is inherently suitable for climbing. Compatibility: compatible with all stem with bar clamp size 31.
More information #ad
8mm. Clamp size: 31. 8mm. Order now, worry free! we're so confident about our product quality that we can provide a 5-year warranty ! Made in Taiwan. 7050 offers better stress corrosion cracking resistance and corrosion resistance. The higher hardness makes it to be machined more difficultly than 6061 & 7005. Riser and sweep features offer better steering and a comfortable posture during riding.| Brand | Satori #ad |
| Manufacturer | SATORI #ad |
| Height | 3.54 Inches |
| Length | 33.07 Inches |
| Weight | 0.75 Pounds |
| Width | 4.33 Inches |
| Part Number | HD-DNT2-740 |
More information #ad
8. PINCASOL
#adIntegrated Carbon Bar and Stem, 740mm Width-iC SL bar/stem, 1-1/8 inch Stem, PINCASOL Carbon Mountain Bike Handlebars, Integrated Handlebar MTB, -17 Degree stem
#adMore information #ad
Specifications– ic integrated cockpit, back sweep: 9-degree back, steerer diameter: 1-1/8in, Rise: Flat T-Bar, Integrated stem -17-degree . Size– stem length : 80/90/100mm, Width: 740mm. Material– carbon ud, Superlight Layup.| Brand | PINCASOL #ad |
| Manufacturer | Pincasol #ad |
| Part Number | Pincasol |
More information #ad
9. Ritchey
#adBlack, 20mm Rise, Ritchey Comp Rizer Handlebar, 740mm
#adMore information #ad
| Brand | Ritchey #ad |
| Manufacturer | Ritchey #ad |
| Height | 3 Inches |
| Length | 30 Inches |
| Weight | 0.65 Pounds |
| Width | 3.9 Inches |
| Part Number | 30435317026 |
| Model | 30435317026 |
More information #ad
10. Satori
#adWidth 740mm, Satori Deviant Bow Professional Level MTB Mountain Bike Bicycle Full Carbon Fibre Flat Straight Handlebar 31.8mm, Super Light
#adAbsorb vibrations: carbon handlebar absorbs vibrations from trial riding. Ensures more comfortable riding. Material: Full Carbon. Prevents vibrations into riders' hands. Weight: around 205g = 045lbs.
More information #ad
Compatibility: compatible with bike stem with clamp Size: 31. 8mm onLY. Professional level handlebar. Width: 740mm. Order now, worry free! we're so confident about our product quality that we can provide 2 year warranty ! Made in Taiwan. Sweep: 9°, rise: 12mm. Handlebars are more rigid and light than aluminum handlebars.| Brand | Satori #ad |
| Manufacturer | SATORI #ad |
| Height | 1.97 Inches |
| Length | 29.53 Inches |
| Weight | 0.46 Pounds |
| Width | 2.76 Inches |
| Part Number | HD-HBC-740 |
More information #ad
