Top 10 XDM Red Dot Mount – Hunting Equipment

As an Amazon Associate I earn from qualifying purchases.

1. Ade Advanced Optics

#ad

XDM, Hellcat Non-OSP Handgun, XDM, XD MOD.2, Ade Advanced Optics Pistol Red Dot Sight Mount Base Plate/Adapter for Springfield XD

#ad
Ade Advanced Optics #ad - This plate is for replacing rear sight. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in. Released in may 2020 This small dovetail Insert plate basically replaces the rear sight using two jam screws. There are two parts of this plate.

Specially made to fit Springfield XD, XD MOD. 2, xdm, xds pistol. Hiring a gunsmith is highly recommended, not holding zero, unprofessional installation such as improper torque will result in screw loose, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Also fit vortex venom/razor/viper, rd3-013bertrillium, Insight, RD3-009Crusader, Docter, Sightmark Minishot. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.

Fit ade rd3-006ahuracan, eotech mrds, rd3-006bcobra, rd3-012delta, burris fastfire, meopta, rd3-015zantitiumRed dots. Comes with screws and hardware for instsallation. It also fits Non-OSP Hellcat. It is design to for springfield non-ospnon optics ready xd/xds/xdm pistols that do not has a optic cut. Including two align pins to attach to any of the four corner holes to prevent any movement.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberNewSpringfieldXD

2. Ade Advanced Optics

#ad

Ade RD3-012-Delta Red Dot Reflex Sight for Springfield XDM XD-M OSP System Pistol Handgun

#ad
Ade Advanced Optics #ad - Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Come with protected cover, Adjustment dailing plate, Adjustment wrench, User Manual and Picatinny mounting plate.

1. 75" length x1. 25" width x1. 15" height. Top load system, no need to Remove the sight to change the Battery. Every time you turn on the dot it stays the same brightness level last time it was turned off. Does not fit the new hellcat osp. Shockproof, fogproof and waterproof for 30 minutes under 4ft water. Feature 1 M. O. A wind age and elevation adjustments with audible click.

Fits directly on springfield xdm xd-m osp system with the #1 mount that comes with OSP without needing to remove the rear sight. Red dot has multi brightness level with one adjustment button. 6 moa dot. This optics does not fit xdm/xd/xds, it only fits xdm OSP models which are the springfield's newest Optics Ready Pistols.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad

3. Ade Advanced Optics

#ad

XD MOD.2, XDM, Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDM, XDS Pistol

#ad
Ade Advanced Optics #ad - There are two parts of this plate. Including two align pins to attach to any of the four corner holes to prevent any movement. Does not fit 5. 25″ xdm competition series. This plate is for replacing rear sight.

This small dovetail Insert plate basically replaces the rear sight using two jam screws. Hiring a gunsmith is highly recommended, not holding zero, unprofessional installation such as improper torque will result in screw loose, damage to the firearm/optic and personal injury. This brand new designed optic mounting plate is to replace the rear sight of pistol. Machined from aircraft grade aluminum with hard anodizing finish.

It is design to for springfield non-ospnon optics ready xd/xds/xdm pistols that do not has a optic cut. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in. Fit ade rd3-006ahuracan, eotech mrds, rd3-012delta, insight, rd3-015zantitiumred dots. New design in 2020 It also fits Non-OSP Hellcat. Specially made to fit Springfield XD, XD MOD. 2, xdm, xds pistol.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberNewSpring-XD

4. Ade Advanced Optics

#ad

Ade RD3-013 Red Dot Reflex Sight for Springfield XDM XD-M OSP Pistol Handgun

#ad
Ade Advanced Optics #ad - It stays on til use manually power off. Come with a mounting plate for picatinny rail. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

Search amazon item # B087H5GHCR for the plate. 4 moa dot. Red dot does not auto power off. This optics does not fit xdm/xd/xds, it only fits xdm OSP models which are the springfield's newest Optics Ready Pistols. It has multi brightness level with one adjustment button. Does not fit the new hellcat osp. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast.

For non-osp xdm/xd/xds models, this red dot need a red dot mount to replace the rear sight. Top load system, no need to Remove the sight to change the Battery. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 BatteryIncluded. Fits directly on springfield xdm xd-m osp system with the #1 mount that comes with OSP without needing to remove the rear sight.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad

5. Outerimpact

#ad

M.R.A, Outerimpact Red Dot Adapter/Mount for Springfield XD, XDM, XD MOD.2, XDS Pistol

#ad
Outerimpact #ad - Proudly 🇺🇸made in the usa🇺🇸. Providing excellent strength, while still being lightweight. Engineered, so you don't have to mill your slide. Compatible red dot sights: trijicon rmr, sig romeo 3, burris fast fire 2 & 3, cmore rts & sts, doctor, shield rms additional screws purchase required, Eotech MRDS, vortex venom, utg reflex micro dot, Leupold Delta Point Pro, Leupold Delta Point, Insight MRDS, Vortex Viper, Vortex Razor, Holosun 507c additional screw purchase required.

Does not work with 5. 25″ xdm competition series model️. We don't want you having to run to the hardware store to find specialized screws, so we included everything you will need to mount over 90 percent of the Red Dots available on the market.

Just remove your rear slight and mount the MRA in its place. Mounting hardware included. Buy with confidence knowing that our products are 100% USA Made. Compatible guns: springfield xd, xdm, xd mod. 2, xds pistol. Machined from 7075-t6 aluminum.
BrandOuterimpact #ad
ManufacturerOuterimpact #ad
Length2.02 Inches
Weight0.81 ounces
Width1.06 Inches
Part NumberOTL-RDM-XD01a

6. DPP Titanium

#ad

Burris Fastfire, DPP Titanium Rear Sight Mount/Mounting Plate/Adapter Compatible with Springfield XD Vortex Venom & Viper, Docter Aluminum Alloy

#ad
DPP Titanium #ad - Update to 30moa design, solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount. No more need shim! Installation hardware and tools included.

Compatible with: springfield xd, xd mod. 2, xdm, xds, pistol. Precision cnc machined from 7075-T6 aerospace grade Aluminum with Black anodized finish. 7x24 quick response technical support. Lifetime warranty. 100% money-back warranty within 30 days of purchase * no questions asked. Does not work with 5. 25″ xdm competition series model. Ultra low profile and lightweight, Easy to install. One piece design for a Secure Zero Hold.
BrandDPP Titanium #ad
ManufacturerDpp Titanium #ad

7. Vortex

#ad

Vortex Optics Venom Red Dot Sight, 3 MOA Dot

#ad
Vortex #ad - 1 moa wind age and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes changing the CR1632 battery a breeze, as you will not have to remove your sight to change the power source.

The venom's aluminum housing ensures this unit will stand up to whatever you throw at it. Parallax Free. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels. High quality, fully multi-coated lenses offer a clean, wide field of view. The venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers.

The venom red dot sight-3 moa promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. The venom red dot will fit well on your rifle or shotgun giving you optimal flexibility. O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
BrandVortex #ad
ManufacturerVortex Optics #ad
Height2.9 Inches
Length6.7 Inches
Weight31 Grams
Width5.1 Inches
Part NumberVMD-3103
ModelVMD-3103
WarrantyManufacture Warranty

8. DPP Titanium

#ad

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

#ad
DPP Titanium #ad - Compatible with trijicon rmr/sro and holosun 407c/507c/508t, ultra Low Profile and lightweight. Not fit the fake models. Precision cnc machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.

The kit includes 1x mount plate, 1x regular sealing plate, 3X RMR Screws short, 1X anti-flicker sealing plate, 3Xsocket set screws and 1X Hex Key. Lifetime warranty. The same kind of products on the market basically use 6061 aluminum but we use 7075, because 7075 aluminum is almost twice stronger than 6061 aluminum. One piece design for a secure zero hold, easy to install*100% money-back warranty within 30 days of purchase*NO QUESTIONS ASKED.
BrandDPP Titanium #ad
ManufacturerDPP Titanium #ad

9. Ade Advanced Optics

#ad

Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight for Springfield XD Pistol

#ad
Ade Advanced Optics #ad - Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.

Waterproof/shock/fog resistant. Designed in Oregon. Does not fits xDS, XDM. 5 illumination settings. We have made it more durable to withstand various recoil and improved the ability to hold zero. Powered by a lithium CR2032 batteryIncluded. Comes with mounting plate for springfield XD and also a standard picatinny mount. We have made several improvements since it's initial release in 2016. 5 moa.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-009+E1

10. Ade Advanced Optics

#ad

XDM, Hellcat Non-OSP Pistol, XD MOD.2, Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight for Springfield XD, XDM

#ad
Ade Advanced Optics #ad - Shockproof, fogproof and waterproof for 30 minutes under 4ft water. The mounting plate also fits springfield hellcat non-osP Micro-compact Pistol. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.

Also comes with ade all new designed adapter mount for Springfield XD, XDM, XD MOD. 2, hellcat non-OSP Pistol. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 moa. Comes with a picaitnny mount. It does nOT fit 5. 25″ xdm competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size. Powered by a lithium CR2032 batteryIncluded. Crusader rd3-009 red dot. 5 illumination settings.
BrandAde Advanced Optics #ad
ManufacturerAde Advanced Optics #ad
Part NumberRD3-009+NewXD